V3 cab 6×6-25 ton series

1. Vehicle parameters:

1.1     Chassis Model

ND2250FD6J

1.2     Sales code

2535

2    Main technical parameters

2.1     Structural parameters

2.1.1    Chassis dimensions

(Length in mm)

9920

(Width in mm)

2495

(Height mm) (Unloaded)

3380

2.1.2    wheelbase(mm)(Full Load):

5050+1450

2.1.3    front suspension(mm)：

1515

2.1.4    rear overhang(mm)：

2505

Available length of top

Long drive: Distance from the center line of the front axleThe space available for the upper body is 965mm behind.

2.2     Mobility parameters

2.2.1    Top speed(km/h)：

≥80

2.2.2    Maximum gradeability(%)：

60

2.3     Passability parameters

2.3.1    Minimum turning diameter(m)：

24

2.3.2    Ground clearance under shaft(mm) (according to GB15089):

339

2.3.3    With front drill unloaded approach angle (°)：

≥20 (unloaded)

2.3.4    No-load departure angle(°)：

20.5

2.4     Chassis quality parameters

2.4.1    Chassis curb weight(kg)：（±3%）

11050

2.4.2    Front axle allowable axle load (kg）：

7000

2.4.3    Rear axle allowable axle load (kg）：

18000

2.5     Interface parameters

2.5.1 Height of the upper surface of the front axle frame from the ground (unloaded) (mm)

1240±20

2.5.2 Height of the upper surface of the rear axle frame from the ground (unloaded) (mm)

1310±20

2.5.3 Frame cross-sectional dimensions (mm)

317×70×8.5+7

2.5.4 Width of the front end of the frame (mm)

901

2.5.5 Rear width of the frame (mm)

761

2.5.6 Frame Hole Positions

Standard Holeφ15mm

2.5.6 Front track (mm)

1995

2.5.7 Rear track (mm)

1800

2.6 Rated passenger capacity of the driver's cab:

2

3    Chassis component structure

3.1     engine

3.1.1    model:

WP12.400E201

3.1.2    Arrangement and number of cylinders

series6 cylinders

3.1.3    Rated power(kw)：

227

3.1.4    Maximum torque(N·m/rpm)：

1700/1000～1400

3.1.5    cylinder diameter× Itinerary (mm）

116×150

3.1.6    Generator parameters

80A/28V

3.1.7 Rotation direction (viewed from the output end)

counterclockwise

3.1.8   Cooling method:

Water cooling

3.1.9Idle speed（rpm）

600±50

3.2     clutch

3.2.1    model:

430

3.2.2    form:

Single-piece dry

3.3     transmission

3.3.1    model:

12JSD180T

3.3.2    Speed ​​ratio:

1st gear

2nd gear

3rd gear

4 gears

5 gears

6 gears

15.53

12.08

9.39

7.33

5.73

4.46

7 gears

8 gears

9 gears

10 gears

11 gears

12 gears

3.48

2.71

2.10

1.64

1.28

1.00

Reverse gear1

Reverse gear2

14.86

3.33

3.3.4 The QH50 force regulator can be selected.

Speed ​​ratio

1st gear

2nd gear

3rd gear

4 gears

5 gears

6 gears

3.59

2.82

2.17

1.69

1.32

1.03

Rotation

Same direction as engine rotation

Rated output torque (Nm）

500

Control method

pneumatic control

3.4     Front axle

model:

AL7/1DS-7/5.263Selectable speed ratio4.7

3.5     Zhongqiao

model:

HD7/016DGS-13/5.263, with an optional 4.7 gear ratio.

3.6     Rear axle

model:

HL7/015DS-13/5.263, speed ratio optional 4.7.

3.7     tire

3.7.1    Specifications and Models

12.00R20

3.7.2    hierarchy

16

3.7.3    Pattern

Mixed patterns

3.8     driver's cab

3.8.1 Form

V3

3.8.2 Cab Color

As needed

3.9   fuel tank

3.9.1  volume(L)：

600L aluminum (400L aluminum optional)

3.9.2 External dimensions (length, width, height) (mm)

1560×650×680(1050×650×680)

3.10   Suspension system

3.10.1  Front suspension:

Multi-leaf spring

3.10.2  Rear suspension:

Multi-leaf spring

3.11   Steering

3.11.1  model:

8098

3.11.2  form:

Hydraulic power steering

3.12   brake

3.12.1  Service brakes:

Dual-circuit air pressure braking

3.12.2  Parking brake:

Spring-powered braking

3.12.3  Auxiliary braking:

Engine exhaust brake

3.12.4  Emergency braking:

Spring-powered braking

3.13   Electrical appliances, instruments, lighting, chassis signals

3.13.1  Battery model and parameters:

2×12V, 165Ah, 180Ah optional

3.13.2  meter:

Combination Instruments

3.14  Chassis electrical modification standard interface

3.14.1 Engine oil, water temperature, and engine speed

have

3.14.2 Second release of throttle

have

3.14.3 Vehicle Start-Stop

have

3.14.5 Cruise

3.15   Spare tire bracket:

3.15.1 Location:

Centrally positioned at the rear